Choose Device Choose Device

Dashboard

Settings

Add Widget To Dashboard
Control Device
Take Readings
Create Rules
Edit Rules
Configure Device

Back

Widgets

Select Cosm Feed
Select Cosm Feed Datastream
Select Graph Duration 5 minutes 30 minutes 1 hour 3 hours 1 day 1 week 30 days 3 months
Add Widget

Back

Control

Digital Pins

Select Pin To Control
PWM Value:

PCF8574A

Select PCF8574 Device 0 1 2 3 4 5 6 7
Select PCF8574 Pin 0 1 2 3 4 5 6 7

Back

Take Readings

Select Type of Reading Digital Pin Analog Pin Time Temperature

Back

Create Rules

Select Rule Type High/Low Rule Analog Value Rule Temperature Rule Time Rule
Rule Name (5 Characters Max):

If you wish to add more pins to your device you can use a PCF8574. In order to do so in the output pin dropdown above select "PCF8574". Note that PWM values cannot be used with a PCF8574 and will be ignored.

Select PCF8574 Device 0 1 2 3 4 5 6 7
Select PCF8574 Pin 0 1 2 3 4 5 6 7
Create Rule

Back

Edit Rules

Select Rule
Edit Rule
Delete Rule

Back

Configure

Digital Pins

Set Pin Modes
Pin Name (Optional): Save Pin Info

Analog Pins

Select Pin
Pin Name (Optional): Save Pin Info

1Wire Devices

Select Device
Device Name (Optional): Save Device Info

Set Device Time

Select Hour
Select Minute
Select Second
Select Day
Select Day of Week
Select Month
Select Year
Set Device Time

Network Info

Device Name: Device IP: Device Subnet: Device Gateway: Device Address: Remote Access URL (No http://): Save Network Settings
Discover 1Wire Devices

Resetting macros will DELETE ALL macros that are store on the device. Use with caution!

Reset Macros

Back

Settings

Save

Local IP Address Range

Enter the first 3 octets of your local network IP. This will allow you to perform auto device discovery. For example, if your computers IP is 192.168.1.100 than input 192.168.1 here. Once inputted, click save.

Local IP Address:
Cosm Username:
Cosm API Key:

Once you've filled out the IP above click Discover Devices to scan your local network. This may take a few minutes, so be patient.

Discover Devices

Dialog

Popup

I have an id of "popup" on my page container and only look like a dialog because the link to me had a data-rel="dialog" attribute which gives me this inset look and a data-transition="pop" attribute to change the transition to pop. Without this, I'd be styled as a normal page.

Back to page "one"

Page Footer